RETZ瑞茨品牌进口卡箍式气动角座阀不锈钢快装式角座阀

品牌：RETZ瑞茨/我们一直致力于流体控制和测控领域的持续创新，始于2005……

一劳永逸，事实证明RETZ角座阀工作寿命超过一百万次 Once and forall, it has been proven that the RETZ angle seat valve has a service life ofover one million times

气动角座阀用于短时间频繁启动,反应灵敏，大流量，无噪声、无水锤,保持高流速,能够节省空间,它采用气动执行机构来操作的导向角座阀来实现开关 Thepneumatic angle seat valve ised for frequent start-up in a short time, withsensitive response, high flow rate, no noise, no water hammer, maintaining highflow rate, and can save space. Ites a guided angle seat valve operated by apneumatic actuator to achieve opening and closing

进口卡箍式气动角座阀工作原理Working principle

在非工作的状态时，由于弹簧力作用，阀门常闭（开）

当执行器活塞呗压缩气体作用时，阀门打开（关闭）

进口卡箍式气动角座阀特点Characteristicsof pneumatic flange angle seat valve

自动调节双层填料密封盖Self-adting,doublepacking glands.

加长防锤形导向和防尘密封圈Extendedspindle guideand wiper seal.

易安装，汽控接口可在360°上任意选定位置Easy to installMotor control interface on the 360°Random designation position

无水击作用(流向阀座下)Waterhammer-free(Flow below seat)

比截止阀高50%的流速 50% higher flowratesthan the Global valves

配有长寿活塞环的免修执行器Maintenance-free actuatorWith long-life piston ring

开启时无振动，比普通阀减少40%的用气量 Shock freeopening With 40% less alr consumption

进口卡箍式气动角座阀参数

阀体材质：304/316

气缸材质：PAC（聚酰胺）、304

阀芯密封：PTFE、FKM

阀门的工作压力应位于0~16/25Bar ，（蒸汽介质在 180℃C时，工作压力为0~10 Bar)

介质温度∶ -10℃~180℃

介质粘度∶≤600cst（mm²/s）

典型应用--

食品和饮料流水线 Foodand beverage

可控介质比如：空气，水，高达180℃蒸汽，碱性溶液和真空Processingintries control of mediumssuch as air, water, steam up to 180℃, lye,vacuum

纺织印染和漂白Textile dyeing and bleaching

可控水，高达180℃的蒸汽，苏打液 Control ofwater, steam up to 180℃Corium hypochlorite

医院和制药工业消毒高压灭菌器Sterilizersand auto-claves for hospitals and the pharmaceutical intry

可控蒸汽高达180℃的水 Control ofsteam,hot water up to 180℃

洗衣Laundries

可控水，蒸汽，洗涤剂Control of water, steam, washing agents

工业洗涤设备和溶解设备Control of solvents, steam, vacuum

可控溶剂，蒸汽和真空Intrial washing equipmentand solvent recovery systems

机械制造Machine tools

可控冷却液Control of coolant agents