GDS-50时间检定仪

GDS-50秒表检定仪是一 用的时间检定仪，供各级计量部门，工厂，院校及科研单位检定各种秒表、毫秒仪，机械秒表等，性能符合检定规程的要求。
技术指标：
1、 检定电子秒表和机械秒表：
在1－99999秒内可任意置数
准确度±（2＊10－7＊输出时段）秒±0.003秒
2、 检定电子毫秒仪（正负两组输出）
在1－99999秒内可任意置数， 小输出100微秒
准确度±（2＊10－7＊输出时段）秒±0.003秒
3、 检定电秒表（适合新规程JJG237-95）
在1－99999秒内可  任意置数
指针式准确度：电同步＜±0.6毫秒
数字式准确度：±（2＊10－7＊输出时段）秒±0.006秒

Introduction

The calibrator is a precision instrument calibrating mechanicalwatch, electronic watch, and 405/407/408/415/417 type pointerelectric watch. The SF2001 watch calibrator ispliant with thewatch calibration procedure JJG 237-2010 issued by the NationalMetrological Bureau. It could beed at metrological department at alllevels, factory, institutions and all research institutes tocalibrate electric watch (405,407,408,415/417), mechanical watchand digital quartz electronic watch. The instrument is fully digitallycontrolled, high reliability,high uracy,plete functions, convenieeration, and strong anti-interfere
ability.
GDS-50 watch calibrator andits essories:
1)GDS-50 watch calibrator       1 piece
2) Three-core power cord              1 piece
3) Dual banana plug test lead         2pieces
4) BNC-banana test lead                1 piece
5) Soft copy ofer’s Guide           1 piece

1.1 Crystal Oscillator
Nominal frequency: 5MHz
Daily aging rate: ≤5×10 -9 /day
Second stability: ≤5×10 -10 /s
uracy: ≤1×10 -7
Warming-up time: over 2 hours
1.2 Calibrate mechanicalwatch and electronic watch (T0is inputted calibration period of time)
Input range: T 0 :1s-99999s
uracy: better than ±(1×10 -7 ×T 0 +3ms)
1.3 Calibrate electricwatch
Pointer:
Input range:
Continu: T 0 :0.1s-99999s
Trigger state: T 0 :1s-99999s
Pe state: T 0 :0.1s-99999s
uracy: better than ±mercial power frequency uracy×T 0+0.6ms)
1.4 Calibrate millisecondcounter and digital electric watch
Input range: T 0 :1×10 2 µs-1×10 9 µs
uracy: better than ±(1×10 -7 ×T 0 +3µs)
The SF2001 calibrator is fullypliant with the mechanicalwatch and digital quartz watch calibration procedure, electricwatch calibration procedure, and electronic millisecond countercalibration procedure, issued by the National Metrological Bureau.

2.1 Working conditions
Voltage: 220(1±10%)V;
Frequency: 50(1±5%)Hz;
Power consumption: <60VA;
Temperature : 0~40℃;
Humidity: <80%
2.2 Mechanical characteristics
Dimension: 329mm×283mm×155mm Weight: 3.7kg
2.3 Operation characteristics: Input with keys, menu display
2.4 Display mode: LCD display,English menu
2.5 Technique: With SMT technique and large-scale IC, the calibrator is ofhigh reliability, small volume and long service life.