塑胶五金网 产品 会员
自干无卤素金属油墨|无卤素金属自干油墨

自干无卤素金属油墨|无卤素金属自干油墨

发布时间:2022-11-07 10:46:35点击率:

所属行业:表面处理-> 丝印-> 丝印
价格:¥180.00
规格:1公斤
供货总量:100000

自干无卤素金属油墨|无卤素金属自干油墨

MPE电镀强化系列油墨 油墨特性: 印刷:丝印移印均可。 表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。 稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。 测试方法(完全干燥后): 1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油; 2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色; 3、 耐磨:橡皮擦500g力水平来回擦500次。 使用方法: 1、使用前应充分搅拌,用后随时封闭; 2、搅拌时加开油水10-15%,稀释到印刷粘度; 3、网板塞网时可用洗网水清洗; 4、不得与其它类型油墨混合使用。 注意事项: 1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷; 2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可; 3、环境温度过高,将会影响油墨原有质量; 4、根据气候变化,请远离火源,阴暗环境下存放。 
Oles MPE Plating Ink

MPE plating strengthening series ink characteristics : mainlyed in plating surface, enhanced surface, vacuum plating surface.PU surface.UV surface and other materials, with a high color, high color, high covering power, high stability, high alcohol and rub characteristics. Printing: screen printing can be. Surface drying and drying time: surface dry time natural volatile 5-10 minutes; work time within 24 hours. Dilution and cleaning: SV3 slow dry open water, UVK1 ( printing open water) can be simultanelyed 718 washingwork water cleaning. Test method (pletely dry ): 1, 3M gummed paper in the paintings of the surface of the ink, 45 degree angle quickly pulled off the oil; 2, 99% of the purity of intrial alcohol, one kilogram of weight of cotton pack in the ink surface, with a horizontal force pulling back and forth 200 times without decolorization; 3: oak, wear resistance eraser 500g force level bh back and forth 500 times.age: 1,e should be fully stirred,e at any time after the closure; 2, add water mixing 10-15%, diluted to 3, screen printing viscosity; the plug is available when washingwork water cleaning; 4, not with other types of ink mixing. Note: 1, the plastic material similar in appearance, but may be of different materials, tomers need to try to determine its requirements, and then batch printing; 2, in the printing process, such as drawing or spread out, may be appropriate to add some slow dry plaster; 3, the ambient temperature is too high, will affect the quality of the original ink; 4, ording to climate change, please stay away from fire, dark environment storage.
 
联系方式
姓名:  吴筱筱
部门:  销售部
职位:  销售经理
电话:  
手机:  
  
地址:  上海上海西冈身路2楼
点此询盘
返 回

免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,塑胶五金网对此不承担任何保证责任

塑胶五金网-wap版