行业标准规范英汉对照-加工工艺（二）

发布时间：2007-12-16 15:16:25点击率：0

技术类别：机械外语

91 GB/T 12215-1990 熔模铸造用铝矾土砂、粉

Bauxite sand and flour for investment casting
92 GB/T 12216-1990 铸造用合脂粘结剂

The residue from distillation of synthetic fatty acids as binder for foundry
93 GB/T 12361-1990 钢质模锻件通用技术条件

General specification of steel die ings
94 GB/T 12362-1990 钢质模锻件公差及机械加工余量

Tolerances and machining allowances of steel die ings
95 GB/T 12363-1990 锻件功能分类

Classification of ing functions
96 GB/T 12469-1990 焊接质量保证钢熔化焊接头的要求和缺陷分级

Quality assurance of welding—Requirement for ion welding joint of steel and classification for imperfection
97 GB/T 12470-1990 低合金钢埋弧焊用焊剂

Fluxes for the submerged arc welding of low alloy steel
98 GB/T 12603-1990 金属热处理工艺分类及代号

Classification and designation on metal heat treatment
99 GB 12935-1991 焊条烘干炉运行能耗标准

Energy consumption standard in operation of covered electrode furnace
100 GB/T 13311-1991 锅炉受压元件焊接接头机械性能试验方法

Boiler pressure parts—Mechanical test for welded joints
101 GB/T 13320-1991 钢质模锻件金相组织评级图及评定方法

Metallographic grading atlas and assessing method for steel die ings
102 GB/T 13450-1992 对接焊接头宽板拉伸试验方法

Method of wide plate tension test for butt welded joint
103 GB/T 13679-1992 锰基钎料

Manganese base brazing filler metals
104 GB/T 13814-1992 镍及镍合金焊条

Nickel and nickel alloy covered welding electrodes
105 GB/T 13815-1992 铝基钎料

Aluminium base brazing filler metals
106 GB/T 13816-1992 焊接接头脉动拉伸疲劳试验方法

Test method for pulsed tensile fatigue of welded joints
107 GB/T 13817-1992 对接接头刚性拘束焊接裂纹试验方法

Method of rigid restraint cracking test for welding butt joint
108 GB/T 13818-1992 压铸锌合金

Zinc die-casting alloys
109 GB/T 13819-1992 铜合金铸件

Copper alloy castings
110 GB/T 13820-1992 镁合金铸件

Magnesium alloy castings
111 GB/T 13821-1992 锌合金压铸件

Zinc alloy die castings
112 GB/T 13822-1992 压铸有色合金试样

Test specimens for non ferr diecasting alloys
113 GB/T 13914-1992 冲压件尺寸公差

Tolerance of dimensions for stampings
114 GB/T 13915-1992 冲压件角度公差

Tolerance of angles for stampings
115 GB/T 13916-1992 冲压件形状和位置未注公差

Unnoted tolerance of shape and position for stampings
116 GB/T 13925-1992 铸造高锰钢金相

Metallographs for high manganese cast steel
117 GB/T 14235.1-1993 熔模铸造模料熔点测定方法(冷却曲线法)

Testing method for melting point of pattern materials in investment casting
118 GB/T 14235.2-1993 熔模铸造模料抗弯强度测定方法

Testing method for bending strength of pattern materials in investment casting
119 GB/T 14235.3-1993 熔模铸造模料灰分测定方法

Testing method for ash content of pattern materials in investment casting
120 GB/T 14235.4-1993 熔模铸造模料线收缩率测定方法

Testing method for linear contraction of pattern materials in investment casting

121 GB/T 14235.5-1993 熔模铸造模料表面硬度测定方法

Testing method for surface hardness of pattern materials in investment casting
122 GB/T 14235.6-1993 熔模铸造模料酸值测定方法

Testing method for acid number of pattern materials in investment casting
123 GB/T 14235.7-1993 熔模铸造模料流动性测定方法

Testing method for fluidity of pattern materials in investment casting
124 GB/T 14235.8-1993 熔模铸造模料粘度测定方法

Testing method for viscosity of pattern materials in investment casting
125 GB/T 14235.9-1993 熔模铸造模料热稳定性测定方法

Testing method for thermal stability of pattern materials in investment casting
126 GB/T 14408-1993 一般工程与结构用低合金铸钢件

Low alloy steel castings for general engineering and structural purposes
127 GB/T 15055-1994 冲压件未注公差尺寸极限偏差

Permissible stamping varitions in dimensions without tolerance indication
128 GB/T 15056-1994 铸造表面粗糙度评定方法

Evaluation method on cast surface roughness
129 GB/T 15111-1994 点焊接头剪切拉伸疲劳试验方法

Test method for shear tensile fatigue of spot welded joints
130 GB/T 15114-1994 铝合金压铸件

Aluminium alloy die-castings
131 GB/T 15115-1994 压铸铝合金 Die casting

aluminium alloys
132 GB/T 15116-1994 压铸铜合金

Die casting copper alloys
133 GB/T 15117-1994 铜合金压铸件

Copper alloy die castings
134 GB/T 15169-1994 钢熔化焊手焊工资格考核方法

Approval testing of manual welders--ion welding-steel
135 GB/T 15620-1995 镍及镍合金焊丝

Nickel and nickel alloy welding wires
136 GB 15735-1995 金属热处理生产过程安全卫生要求

Requirements for the safety and health in production process of metal heat treatment
137 GB/T 15747-1995 正面角焊缝接头拉伸试验方法

Method of tension test for front fillet welded joint
138 GB/T 15825.1-1995 金属薄板成形性能与试验方法成形性能和指标

Sheet metal formability and test methods--Formability and indexes
139 GB/T 15825.2-1995 金属薄板成形性能与试验方法通用试验规程

Sheet metal formability and test methods--General test rules
140 GB/T 15825.3-1995 金属薄板成形性能与试验方法拉深与拉深载荷试验

Sheet metal formability and test methods--Drawing and drawing load test
141 GB/T 15825.4-1995 金属薄板成形性能和试验方法扩孔试验

Sheet metal formability and test methods--Hole expanding test
142 GB/T 15825.5-1995 金属薄板成形性能与试验方法弯曲试验

Sheet metal formability and test methods--Bending test
143 GB/T 15825.6-1995 金属薄板成形性能与试验方法锥杯试验

Sheet metal formability and test methods--Conical cup test
144 GB/T 15825.7-1995 金属薄板成形性能与试验方法凸耳试验

Sheet metal formability and test methods--Earing test
145 GB/T 15825.8-1995 金属薄板成形性能与试验方法成形极限图(FLD)试验

Sheet metal formability and test methods--Forming limit diagram (FLD) test
146 GB/T 15826.1-1995 锤上钢质自由锻件机械加工余量与公差一般要求

Machining allowances and tolerances for steel open die ings on hammer--General reguirement
147 GB/T 15826.2-1995 锤上钢质自由锻件机械加工余量与公差盘、柱类

Machining allowances and tolerances for steel open die ings on hammer--Disks and columns
148 GB/T 15826.3-1995 锤上钢质自由锻件机械加工余量与公差带孔圆盘类

Machining allowances and tolerances for steel open die ings on hammer--Disk swith holes
149 GB/T 15826.4-1995 锤上钢质自由锻件机械加工余量与公差圆环类

Machining allowances and tolerances for steel open die ings on hammer--Rings
150 GB/T 15826.5-1995 锤上钢质自由锻件机械加工余量与公差套筒类

Machining allowances and tolerances for steel open die ings on hammer--Seamles cylinder hings

151 GB/T 15826.6-1995 锤上钢质自由锻件机械加工余量与公差光轴类

Machining allowances and tolerances for steel open die ings on hammer--Shaft without steps
152 GB/T 15826.7-1995 锤上钢质自由锻件机械加工余量与公差台阶轴类

Machining allowances and tolerances for steel open die ings on hammer--Shaft with steps
153 GB/T 15826.8-1995 锤上钢质自由锻件机械加工余量与公差单拐曲轴类

Machining allowances and tolerances for steel open dle ings on hammer--Single throw crankshaft
154 GB/T 158

上一个：行业标准规范汉英对照—内燃机（一）

下一个：行业标准规范英汉对照-加工工艺（一）