行业标准规范英汉对照-加工工艺（一）

发布时间：2007-12-16 15:16:26点击率：0

技术类别：机械外语

1 GB/T 780-1979 汽油发动机化油器出口凸缘尺寸

Carbureters for automobile engines--Dimensions of outlet flanges 2 GB/T 983-1995 不锈钢焊条 Stainless steel covered electrodes
3 GB/T 984-1985 堆焊焊条

Covered electrodes for hardfacing
4 GB/T 985-1988 气焊、手工电弧焊及气体保护焊焊缝坡口的基本形式与尺寸

Basic forms and sizes of weld grooves for gas welding manual arc welding and gas-Shielded arc welding
5 GB/T 986-1988 埋弧焊焊缝坡口的基本形式和尺寸

Basic forms and sizes of weld grooves for submerged arc welding
6 GB/T 1173-1995 铸造铝合金

Casting aluminium alloys
7 GB/T 1174-1992 铸造轴承合金

cast bearing metals
8 GB/T 1176-1987 铸造铜合金技术条件

Specification for cast copper alloys
9 GB/T 1177-1991 铸造镁合金

Casting magnesium alloys
10 GB/T 1348-1988 球墨铸铁件

Spheroidal graphite iron castings
11 GB/T 1954-1980 铬镍奥氏体不锈钢焊缝铁素体含量测量方法

Determination of the weldign seam iron element contentin chromium,nickel tenitic stainless steel
12 GB/T 2100-1980 不锈耐酸钢铸件技术条件

Stainless acid-resistant steel castings--Specifications
13 GB/T 2649-1989 焊接接头机械性能试验取样方法

Methods of sampling for mechanical properties tests of welded joint
14 GB/T 2650-1989 焊接接头冲击试验方法

Method of impact test for welded joint
15 GB/T 2651-1989 焊接接头拉伸试验方法

Method of tensile test for welded joint
16 GB/T 2652-1989 焊缝及熔敷金属拉伸试验方法

Method of tensile tests for weld and deposited metal
17 GB/T 2653-1989 焊接接头弯曲及压扁试验方法

Methods of bend andpression tests for welded joint
18 GB/T 2654-1989 焊接接头及堆焊金属硬度试验方法

Methods of hardness tests for welded joint and surfacing metal
19 GB/T 2655-1989 焊接接头应变时效敏感性试验方法

Method of strain-age sensibillity test for welded joint
20 GB/T 2656-1981 焊缝金属和焊接接头的疲劳试验法

Weld beads metal and welds--Fatigue test
21 GB/T 2684-1981 铸造用原砂及混合料试验方法

Foundry sands and sand mixtures for casting--Method of testing
22 GB/T 3180-1982 中锰抗磨球墨铸铁件技术条件

Specification for medium manganese wear-resistant spheroidal iron castings
23 GB/T 3375-1994 焊接术语

Welding terminology
24 GB/T 3669-1983 铝及铝合金焊条

Coated electrodes for aluminium and aluminium alloys
25 GB/T 3670-1995 铜及铜合金焊条

Coated electrodes for copper and copper alloys
26 GB/T 3731-1983 涂料焊条效率、金属回收率和熔敷系数的测定

Covered electrodes--Determination of the efficiency, metal recovery and deposition coefficient
27 GB/T 3934-1983 普通螺纹量规

Gauges for general purpose screw threads
28 GB/T 3965-1995 熔敷金属中扩散氢测定方法

Methods for determination of difible hydrogen in deposited metal

29 GB/T 4675.1-1984 焊接性试验斜Y型坡口焊接裂纹试验方法

Weldability testing--Method of Y-groove cracking test
30 GB/T 4675.2-1984 焊接性试验搭接接头(CTS) 焊接裂纹试验方法

Weldability testing--Method of controlled thermal severity cracking test

31 GB/T 4675.3-1984 焊接性试验 T型接头焊接裂纹试验方法

Weldability testing--Method of cracking test for welded tee joint
32 GB/T 4675.4-1984 焊接性试验压板对接(FISCO) 焊接裂纹试验方法

Weldability testing--Method of FISCO cracking test
33 GB/T 4675.5-1984 焊接性试验焊接热影响区硬度试验方法

Weldability testing--Testing method of maximum hard ness in weld heat-affected zone
34 GB/T 4863-1985 机械制造工艺基本术语

General terminology of machine-building technology
35 GB/T 5117-1995 碳钢焊条

Carbon steel covered electrodes
36 GB/T 5118-1995 低合金钢焊条

Low alloy steel covered electrodes
37 GB/T 5185-1985 金属焊接及钎焊方法在图样上的表示代号

Welding, brazing, braze welding and soldering of metals--List of processes for symbolic representation on drawings
38 GB/T 5293-1985 碳素钢埋弧焊用焊剂

Fluxes for the submerged arc welding of carbon steel
39 GB/T 5613-1995 铸钢牌号表示方法

Code for representing cast steels
40 GB/T 5614-1985 铸铁件热处理状态的名称、定义及代号

The designations definitions and symbols for heat treatment tempers of iron castings
41 GB/T 5615-1985 铸钢件热处理状态的名称、定义及代号

The designations, definitions and symbols for heat treatment tempers of steel castings
42 GB/T 5676-1985 一般工程用铸造碳钢

Cast carbon steels for general engineering purposes
43 GB/T 5677-1985 铸钢件射线照相及底片等级分类方法

Methods of radiographic testing and classification of radiographs for steel castings
44 GB/T 5678-1985 铸造合金光谱分析取样方法

The method for sampling cast alloys for spectrochemical analysis
45 GB/T 6208-1995 钎料型号表示方法

Filler metal for soft soldering and brazing--Designation
46 GB/T 6296-1986 灰铸铁冲击试验方法

Grey cast iron impact test
47 GB/T 6416-1986 影响钢熔化焊接头质量的技术因素

Technical factors influencing the quality of the ion welded joints in steel
48 GB/T 6417-1986 金属熔化焊焊缝缺陷分类及说明

Classification of imperfections in metallic ion welds, with explanations
49 GB/T 6418-1993 铜基钎料

Copper base brazing filler metals
50 GB/T 6967-1986 工程结构用中、高强度不锈钢铸件

Medium and high strength stainless steel castings for engineering structure purposes
51 GB/T 7032-1986 T型角焊接头弯曲试验方法

Method of bend test for T type fillet welded joint
52 GB/T 7143-1986 铸造用硅砂化学分析方法

Methods for chemical analysis of silica sand for foundry
53 GB/T 7216-1987 灰铸铁金相

Gray cast iron metallography
54 GB/T 7232-1987 金属热处理工艺术语

Terminology of metal heat treatment
55 GB/T 7233-1987 铸钢件超声探伤及质量评级标准

Methods for ultrasonic testing and for specifying quality levels of steel castings
56 GB/T 7659-1987 焊接结构用碳素钢铸件

Carbon steel castings suitable for welded structure
57 GB/T 8063-1994 铸造有色金属及其合号表示方法

Designation of cast nonferr metals and their alloys
58 GB/T 8110-1995 气体保护电弧焊用碳钢、低合金钢焊丝

Welding wires for gas shielding arc welding of carbon and low alloy steels
59 GB/T 8121-1987 热处理工艺材料名词术语

The terminology of technological materials for heat treatment
60 GB/T 8263-1987 抗磨白口铸铁技术条件

Specification for abrasion resistant white cast irons

61 GB/T 8454-1987 焊条用还原钛铁矿粉中亚铁量的测定

Determination of ferr iron content in reduced ilmenite powder for welding rod
62 GB/T 8491-1987 高硅耐蚀铸铁件

Corrosion resistant high silicon iron castings
63 GB/T 8492-1987 耐热钢铸件

Heat resistant steel castings
64 GB/T 8493-1987 一般工程用铸造碳钢金相

Metallograph of cast carbon steels for general engineering purposes
65 GB/T 8539-1987 齿轮材料及热处理质量检验的一般规定

General specification for quality inspection of gear materials and their heat treatment
66 GB/T 8619-1988 钎缝强度试验方法

Method of the strength test for brazed and soldered seam
67 GB/T 9437-1988 耐热铸铁件

Heat resistant iron castings
68 GB/T 9438-1988 铝合金铸件技术条件

Aluminium alloy castings--Technical specification
69 GB/T 9439-1988 灰铸铁件

Grey iron castings
70 GB/T 9

上一个：行业标准规范英汉对照-加工工艺（二）

下一个：行业标准规范英汉对照-通用机械（三）